Home > > News > Industry News

Everything You Need to Know About Schottky Diodes +MORE

   Everything You Need to Know About Schottky Diodes

Like other diodes, the Schottky diode controls the direction of current flow in a circuit. These devices act like one-way streets in the world of electronics, letting current pass only from anode 

to cathode. However, unlike standard diodes, the Schottky diode is known for its low forward voltage and fast switching ability. This makes them an ideal choice for radio 

frequencyapplications and any device with low voltage requirements. There are a variety of uses for the schottky diode, including:

  • Power Rectification. Schottky diodes can be used in high power applications thanks to its low forward voltage drop. These diodes will waste less power and might reduce the size of your heatsink.
  • Multiple Power Supplies. Schottky diodes can also help to keep power separated in a dual-power supply setup, like with a mains supply and battery.
  • Solar Cells. Schottky diodes can help to maximize solar cell efficiency with their low forward voltage drop. They also help protect the cell from reverse charges.  
  • Clamping. Schottky diodes can also be used as a clamp within a transistor circuit, such as in the 74LS or 74S logic circuits.


Schottky Diode Advantages & Disadvantages

        One of the primary advantages of using a Schottky diode over a regular diode is their low forward voltage drop. This allows a Schottky diode to consume less voltage than a standard diode, using only 0.3-0.4V across its junctions. In the graph below you can see that a forward voltage drop of about 0.3V begins to increase current significantly in a Schottky diode. This current increase would not take effect until about 0.6V for a standard diode.

In the images below we have two circuits to illustrate the benefits of a lower forward voltage drop. The circuit on the left contains a conventional diode, the one on the right a Schottky diode. Both are powered with a 2V DC source.

The conventional diode consumes 0.7V, leaving only 1.3V to power the load. With its lower forward voltage drop, the Schottky diode consumes only 0.3V, leaving 1.7V to power the load. If our load required 1.5V  then only the Schottky diode would be up for the job.

Other advantages for using a Schottky diode over a regular diode include:

  • Faster recovery time. The small amount of charge stored within a Schottky diode makes it ideal for high speed switching applications.
  • Less noise. The Schottky diode will produce less unwanted noise than your typical p-n junction diode.
  • Better performance. The Schottky diode will consume less power and can easily meet low-voltage application requirements.

There are some disadvantages to keep in mind about Schottky diodes. A reverse-biased Schottky diode will experience a higher level of reverse current than a traditional diode. This will lead to more leaked current when connected in reverse.

Schottky diodes also have a lower maximum reverse voltage than standard diodes, usually 50V or less. Once this value is exceeded then the Schottky diode will break down and start to conduct a large amount of current in reverse. However, even before reaching this reverse value the Schottky diode will still leak a small amount of current like any other diode.

 How a Schottky Diode Works

A typical diode combines p-type and n-type semiconductors to form a p-n junction. In a Schottky diode metal replaces the p-type semiconductor. This metal can range from platinum to tungsten, molybdenum, gold, etc.

When metal is combined with an n-type semiconductor an m-s junction is formed. This junction is referred to as a Schottky Barrier. The behavior of the Schottky Barrier will differ depending on whether the diode is in an unbiased, forward-biased, or reverse-biased state.

Unbiased State

In an unbiased state, free electrons will move from the n-type semiconductor to the metal in order to establish balance. This flow of electrons created the Schottky Barrier where negative and positive ions meet. Free electrons will need a greater supplied energy than their built-in voltage to overcome this barrier.

Forward-Biased State

Connecting the positive terminal of a battery to the metal and negative terminal to the n-type semiconductor will create a forward-biased state. In this state, electrons can cross the junction from n-type to metal if the applied voltage is greater than 0.2 volts. This results in a flow of current that’s typical for most diodes.

Reverse-Biased State

Connecting the negative terminal of a battery to the metal and positive terminal to the n-type semiconductor will create a reverse-biased state. This state expands the Schottky Barrier and prevents the flow of electric current. However, if the reverse bias voltage continues to increase this can eventually break down the barrier. Doing so will allow current to flow in the reverse direction and may damage the component.

Schottky Diode Manufacturing & Parameters

There are a variety of methods to manufacture a Schottky diode. The simplest is to connect a metal wire against a semiconductor surface, called Point Contact. Some Schottky diodes are still manufactured using this method, but it is not known for its reliability.

The most popular technique is using a vacuum to deposit metal onto the semiconductor surface. This method presents an issue of the metal edges breaking down due to the effects of electric fields around the semiconductor plate. To remedy this, manufacturers will protect the semiconductor plate with an oxide guard ring. Adding this guard ring helps to improve the reverse breakdown threshold and prevents the junction from being physically destroyed.

 Schottky Diode Parameters

Below you’ll find a list of parameters to consider when choosing a Schottky diode for your next electronics project:

Schottky Diode Examples

It helps to see how these parameters are typically listed on a manufacturer’s website or datasheet. Here are two examples:

The 1N5711 Schottky diode is an ultra-fast switching diode with high reverse breakdown, low forward voltage drop, and a guard ring for junction protection.

The 1N5828 Schottky diode is a stud-type diode used for power rectification applications.

Control the Flow

Planning to work on an RF or power application that requires low-voltage operation? Schottky diodes are the way to go! These diodes are well known for their low forward voltage drop and quick switching speeds. Whether they’re used in solar cells or power rectification, you can’t beat the low 0.3V voltage drop and added efficiency. Autodesk EAGLE already includes a ton of free Schottky diode libraries ready to use. No need to make your own.